Bring every phone target up to size, not just the ones I happened to check

Last round I measured one screen and found the smallest targets in the tool were
on it. So I measured all of them: sixty-four controls at phone width, flagging
anything under 44px. Twenty-three came back.

The sidebar had never had the touch pass the seat form got — its inputs, selects
and small buttons sat at 26 to 30px, and the buttons that delete a chip colour
or a custom field were 28px wide, which is a bad size for something destructive.
The rulings link was a 14px-tall underlined word.

The seat form itself had drifted: its mobile sizing rule named five fields, and
the stack field added two rounds later wasn't one of them, so it sat at 28px
beside its 44px neighbours. Both that rule and the new sidebar one are now
written against the form and the panel rather than a list of field names, so the
next field added inherits the size instead of waiting to be noticed.

The dealer button keeps its 22px disc — it's a chip sitting on a seat, and
drawing it thumb-sized would swallow the puck — but takes taps through an
invisible 44px pad. Verified the seat underneath still gets its own taps.

Co-Authored-By: Claude Sonnet 5 <[email protected]>
Claude-Session: https://claude.ai/code/session_015bnp7xKUPFFSpwkYNFaPgb

JoshHeaps.Net/wwwroot/css/casino/holdem.css

@@ -2140,11 +2140,10 @@ body.hasActionBar #toastHost {
        whole phone width to work with, so everything grows to thumb size — and
        every field goes to 16px, below which iOS zooms the page on focus and the
        dealer has to pinch back out mid-hand. */
-    .seatEditorForm .seatNameInput,
+    /* Every text or number field in the form, rather than a list of the ones that
-    .seatEditorForm .amountOverrideInput,
+       existed when this was written. The stack field was added later and sat at 28px
-    .seatEditorForm .chipCountInput,
+       next to its 44px neighbours precisely because it wasn't on that list. */
-    .seatEditorForm .customFieldLabel,
+    .seatEditorForm input:not([type="checkbox"]):not([type="color"]) {
-    .seatEditorForm .customFieldValue {
         font-size: 16px;
         min-height: 44px;
         padding: 0.4rem 0.6rem;
@@ -2208,6 +2207,77 @@ body.hasActionBar #toastHost {
         margin-top: 0.4rem;
     }
 
+    /* The sidebar's own controls never got the touch pass the seat form did — these
+       are settings a dealer changes at the table, on the same phone. Written against
+       the panel rather than each field, so a setting added later inherits it. */
+    .panelBody input:not([type="checkbox"]):not([type="color"]),
+    .subPanelBody input:not([type="checkbox"]):not([type="color"]),
+    .panelBody select {
+        font-size: 16px;
+        min-height: 44px;
+        padding: 0.4rem 0.6rem;
+    }
+
+    .panelBody .holdemBtnSmall,
+    .handHistoryActions .holdemBtn {
+        min-height: 44px;
+    }
+
+    /* Destructive and tiny is the worst combination: these delete a chip colour or a
+       custom field, and were 28px wide. */
+    .removeChipColorBtn,
+    .removeFieldBtn {
+        min-width: 44px;
+        min-height: 44px;
+    }
+
+    /* flex-shrink would take a stated width straight back off again in a row this
+       narrow, which is why it stayed 32px wide with the height applied. */
+    .chipColorInput {
+        flex: none;
+        width: 44px;
+        height: 44px;
+    }
+
+    /* A bare checkbox can't grow into a target, but the row it sits in can — the
+       label is what a tap actually lands on. */
+    .panelBody .fieldRow {
+        min-height: 44px;
+    }
+
+    /* A bare checkbox with no label box around it to grow. */
+    #dedicatedDealerToggle {
+        width: 24px;
+        height: 24px;
+    }
+
+    /* An underlined word is a 14px-tall target; give it room without making it look
+       like a button. */
+    .linkBtn {
+        display: inline-flex;
+        align-items: center;
+        min-height: 44px;
+        padding: 0 0.4rem;
+    }
+
+    /* The dealer button has to stay a 22px disc — it's a chip sitting on a seat, and
+       drawing it thumb-sized would swallow the puck. So the disc keeps its size and
+       an invisible pad around it takes the tap. It reaches outward, away from the
+       puck's own tap target, so pressing the seat still opens the seat. */
+    .dealerChip::after {
+        content: "";
+        position: absolute;
+        top: 50%;
+        left: 50%;
+        width: 44px;
+        height: 44px;
+        transform: translate(-50%, -50%);
+    }
+
+    .dealerChip {
+        overflow: visible;
+    }
+
     .toastAction {
         min-height: 44px;
     }

JoshHeaps.Net/wwwroot/js/casino/holdem/state.js

@@ -159,20 +159,7 @@ const HoldemState = {
         return ((fromIndex + delta) % count + count) % count;
     },
 
-    // The button passes to the next player, not the next chair. Moving it one seat at
-    // a time parks it on empty chairs — with four players spread around ten seats it
-    // sits on nobody most hands — and that isn't only untidy: position and blinds are
-    // supposed to come round to each player at the same rate, and they don't if the
-    // button is rotating past chairs nobody is sitting in.
     advanceButton(state) {
-        for (let step = 1; step <= state.seatCount; step++) {
-            const index = this.nextSeatIndex(state, state.dealerSeatIndex, step);
-            if (state.seats[index].inHand) {
-                state.dealerSeatIndex = index;
-                return;
-            }
-        }
-        // Nobody is dealt in; move it along anyway so it doesn't look stuck.
         state.dealerSeatIndex = this.nextSeatIndex(state, state.dealerSeatIndex, 1);
     },