master
3
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  jheapsandClaude Opus 5
|
8aa90e90a4 |
Give a phone on its side the table shape it needs
The last two rounds left one thing failing and said so: a landscape phone with six or twelve seats stacked two of them 25px apart at each end of the felt, with pucks 64px tall. It has been there since seats were first spaced by distance rather than by angle. Three things were wrong at once, and it needed all three. The rim is the wrong shape when the table is very flat. An ellipse 616px wide and 96px tall has nowhere to put the seats near its ends: the curve doubles back on itself, so two seats a long walk apart come out one above the other. Past two and a half times wider than tall the rim is now a stadium — two straight rails with a half-round cap at each end, which is how a real poker table is built and exactly why it is built that way. A cap is a half-circle of the felt's own height, so an end takes one seat and the rest is rail. Only past that ratio: measured, the cut-off lands between a landscape phone at 4.4 and every other layout the tool has, 1.45 at 1280x900 and 1.0 to 1.4 upright, so no working table changes shape. The ring had less height than the felt did. The seat layer is inset by half a puck to keep the outermost seats on screen, and 26px off the top and bottom of a 96px felt left 44px to work with — less than half the table, which is why no rim shape could have fixed it alone. The inset is a percentage where the felt is short. The landscape branch never had that rule at all, because it is matched on height while the inset lives in a width query, so an 844px-wide phone on its side drew its ring against the felt's whole box; with a flat-topped stadium rail that put a dealer button over Resolve Pot in the header. And the puck was a line too tall. In the tight state the hole cards give up their row: of the four things on a puck, the cards are the one the dealer is holding in their other hand, and the seat editor still shows them. That took the puck from 64px to 55px, which is what finally cleared the ends. Measured across 36 combinations of nine viewports and 2, 6, 9 and 12 seats: the closest two seats at 640x360 go from 25px apart to 55px, and every combination is clean. Then 216 audits across thirteen viewports, three seat counts and both a mouse and a thumb: no failures, no console errors. Co-Authored-By: Claude Opus 5 <[email protected]> Claude-Session: https://claude.ai/code/session_015bnp7xKUPFFSpwkYNFaPgb |
||
|
jheapsandClaude Opus 5
|
dc5db16ffd |
Let the phone table use the width it has
Last round capped the felt so the ring would clear the action bar, and capped the wrong dimension. The wide layout sizes the felt from its width, so capping the width is how you shorten it there — on a phone the felt is already the full width of the column, and capping that threw away 96px of a 360px screen: a 240x240 table inside a 336px space, with nine pucks crowding it. A max-height instead leaves the width alone and lets the aspect ratio give way, which turns a short screen into a wide oval — the shape a poker table is. At 360x640: 336x240 rather than 240x240, same clearance over the bar, and the twelve-seat ring that was crowded at 240 comes out clean, which closes the one combination left failing last round. Where the room isn't the binding constraint, 390x844 and up, nothing changes and the table stays round. The landscape branch now says max-height: none, because it already spends the same measured room on its own height and applying it twice took the felt to the floor value. The measurement that decides whether pucks shrink was also wrong, in a way that only showed up once it was asked a hard question. Rim length per seat measures the walk between two seats, not the gap between them, and on a long oval the rim doubles back at the ends: twelve seats at 640x360 had 193px of rim each and sat 60px apart. It now measures the closest two neighbours directly, off the ring itself — and off the seat layer rather than the felt, because the layer is inset by half a puck on a phone and the felt's box put the answer out by 30px. That makes the rule geometric rather than about screen size, so it is no longer scoped to a phone media query: a wide landscape felt crowds at its ends while its rim claims there is room, and now it is told so. Pucks still touch at nine and twelve seats on a small screen. Tried 46px against 58px: on a roomy phone 46 cleared every overlap where 58 left two, but in a hand with a side pot, where the bar has grown and the felt has shrunk to suit, 46 overlapped four times and 58 twice. That is the felt being small, not the puck being wide, and paying for it with an ellipsis on every long name buys nothing. What has to hold is that each seat keeps its own centre, and that is measured at every size. Co-Authored-By: Claude Opus 5 <[email protected]> Claude-Session: https://claude.ai/code/session_015bnp7xKUPFFSpwkYNFaPgb |
||
|
jheapsandClaude Opus 5
|
b97453fba1 |
Seat the table properly on a phone held sideways
Landscape is the one shape this layout has never really fitted, and the audit was calling two separate faults there. The felt worked its own height out as `100vh - bar - 7rem`, guessing that everything above it came to 7rem. That is 108px at 640x360, which the guess covers, and 119px at 844x390, which it doesn't — so on an iPhone on its side the bottom row of seats sat up to 26px inside the action bar. The measurement it needed was already being published for the wide layout: the bar's real height, the wrap's real offset and the bottom seat's overhang, all taken off the window. It uses that now. The floor under it drops from 220px to 96px, because 220 was not a size a 390px-tall window has to give — holding out for it was itself how seats ended up behind the Fold button, which is the one thing the floor exists to prevent. That still left the header taking two rows, and the second row is 44px of the 390. The title block and the five buttons came to 829px inside a 765px header, missing one line by 64px. The page title goes — the one thing on this screen a dealer already knows — hidden from the eye rather than removed, so the heading is still there for a screen reader. The buttons tighten across but never down: they stay a 44px thumb target. The seats themselves were spaced by angle, which is only even spacing on a circle. On a 601x126 felt, ten seats at 36° apart put four of them down each steep end, 20px apart, with pucks 72px tall — a seat's centre belonged to its neighbour, so tapping a player got the wrong one. They now walk the rim by distance instead, which puts them along the two long rails the way a real table seats people. Closest neighbours go from 33px apart to 59px. Measured at 640x360, 667x375 and 844x390 with 9-, 10- and 12-seat tables: every combination the audit used to fail is clean, bar a 10-seat table at 640x360, where two seats at the end of a rim that flat still overlap. Portrait, tablet and desktop are unchanged — the floor never bound there, and on a rounder felt walking the rim gives back the same angles it always did. Co-Authored-By: Claude Opus 5 <[email protected]> Claude-Session: https://claude.ai/code/session_015bnp7xKUPFFSpwkYNFaPgb |